Product Instructions
1-Temp THERMOLABEL®/THERMOTAB®
- Remove label from sheet.
- Adhere to a clean surface. Press firmly and ensure that there is full contact with the test surface.
- Heat/run through procedure that is being tested.
- The gray/white temperature sensitive element will turn black if the surface has reached the rated temperature.
- Allow to cool to the touch before slowly peeling the label off the test surface to avoid leaving adhesive residue.
3-Temp/5-Temp/8-Temp THERMOLABEL®
- Remove label from sheet.
- Adhere to a clean surface. Press firmly and ensure that there is full contact with the test surface.
- Heat/run through procedure that is being tested.
- The gray/white temperature sensitive elements will turn black as the rated temperature is reached. The highest temperature reached will be between the last black temperature element and the first gray/white temperature element.
- Allow to cool to the touch before slowly peeling the label off the test surface to avoid leaving adhesive residue.
THERMOPAPER®
- Affix Thermopaper on a clean surface.
- Heat/run through procedure that is being tested.
- The gray/white temperature sensitive element will turn to black if the surface has reached the rated temperature.
Dishwasher Rinse Temp THERMOLABEL®
- Locate the rinse water pipe. It is typically a vertical pipe on the right side of the machine towards the rear.
- Remove label from sheet.
- Apply to rinse water pipe carefully with the non-adhesive tab extended off pipe. The pipe will still be hot. Protect hands when applying to avoid burns.
- Run the machine's cycle as normal.
- The temperature sensitive square will turn black as the temperature is reached.
- Peel label from pipe using the non-adhesive tab.